Contact Us

Home    Redispersible Polymer Powder (RDP)    TDS ZJ- 6017 EN

TDS ZJ- 6017 EN

Redispersible Polymer Powder                                                 ZJ- 6017

Technical Instruction

ZJ-6017 is a vinyl acetate/vinyl redispersible copolymer latex powder, which has excellent anti-saponification properties. Particularly suitable for use with other inorganic binders ,such as cement, lime and gypsum or as a bonding component for the manufacture of high adhesion tile adhesives, high toughness wall and floor leveling materials, caulks, repairs Mortar and so on.      


ZJ-6017 contains a fine mineral anti-caking agent and does not contain any solvents, plasticizers and filming aids. It can improve the adhesion, flexural strength, plasticity, wear resistance and workability of the modified mixture, and has no adverse effect on the fluidity, thixotropy and water retention of the material.


White powder, freely flow

Stabilizing system

Polyvinyl alcohol

Additive agent

Mineral Anti-block agent

Product Technical Data





Solids content




Ash content




Bulk density




Average particle size




PH value




MFFT approx



Tg approx




Main Application Range

l                       Tile and construction adhesives

It is recommended for the manufacture of tile adhesives with good frost resistance, heat resistance and high adhesion. The recommended dosage is 1.5~3%.

l                      Bonding mortar for exterior wall insulation finish system (EIFS)

Adding 1.5~3%ZJ-6017 to the external wall insulation system can improve its adhesion and durability.

l                       Self-leveling floor / floor material

It is recommended to add 1.5~5% ZJ-6017 when preparing self-leveling floor material. To obtain a fast-condensing system, Portland cement, high alumina cement and gypsum are used together.

Usually, it is also necessary to add a certain defoaming agent.

l                       Plastering and Facing Putty

Adding 2~5%ZJ-6017 to cement or lime-cement based finish plaster improves adhesion, abrasion resistance and flexibility.

l                       Internal and external wall putty and joint Mixture

According to different strength requirements, 2~3% of ZJ-6017, as well as other organic additives such as cellulose ethers,starch ethers, should be added.


This product is made of kraft paper and plastic film lined film bag, 25kg packaging.


ZJ 6017 should be stored in a cool place and protected from moisture. Since this product is thermoplastic, it should be stored under high temperature conditions, otherwise there will be a risk of agglomeration. From the time of delivery, the storage time should not exceed 6 months.