Functional Hydroxypropyl Methyl Cellulose Ether
Functional Hydroxypropyl Methyl Cellulose Ether
Technical Data Sheet
Non-ionic hydroxypropyl methylcellulose ether (HPMC), is small particle size, fast dissolution rate, high gel temperature, good water retention at high temperature, it can be used in cement-based or gypsum-based mortar, and provide good thickening for mortar and water retention. The product complies with the standard requirements of JC/T 2190-2013 “Cellulose Ether for Construction Dry-Mixed Mortar ".
|
Item |
Index |
|||
|
ZJ-400E For self-leveling mortar |
ZJ-HP50G For gypsum plaster |
ZJ-HP10T For tile adhesive |
ZJ-HP80P For putty |
|
|
Gel temperature (℃) |
70-90 |
65-80 |
65-80 |
65-80 |
|
Fineness (150μm sieve ) (%) |
≤ 10.0 |
≤ 10.0 |
≤ 10.0 |
≤ 10.0 |
|
Ash (%) |
≤ 5.0 |
≤ 5.0 |
≤ 5.0 |
≤ 5.0 |
|
pH value |
7.0 ± 1.0 |
7.0 ± 1.0 |
7.0 ± 1.0 |
7.0 ± 1.0 |
|
Bulk density / ( g / L ) |
400 ± 100 |
400 ± 100 |
400 ± 100 |
400 ± 100 |
ZJ- 400E can be applied to fluidity mortar, such as cement-based self-leveling mortar, gypsum-based self-leveling mortar, and also can be used for grouting material, support mortar and pressure grouting material, etc.
ZJ- HP50G can be used for light gypsum plaster, heavy gypsum plaster and caulking plaster, etc.
ZJ-HP10T can be used for tile adhesives with various grade requirements.
ZJ-HP80P can be used for interior and exterior wall putty.
Add the cellulose ether to the powder, mix well and use it. According to performance requirements and application effects, the recommended dosage is 0.03 %-0.5 % of the total weight of the dry blend.
Please refer to Material Safety Data Sheet for specific safety information.
