Redispersible Polymer Powder ZJ-6015
Redispersible Polymer Powder ZJ-6015
Technical Datasheet
Product Description
ZJ-6015 series is Vac/E redispersible copolymerization polymer powder. It is especially suitable for mixing with other inorganic binders such as cement, lime and gypsum or as a bonding component alone, for the manufacture of flexible construction adhesives, wall and floor leveling materials, joint mixture, plastering and repairing mortar.
Chemical Indicators
|
Appearance |
White powder |
||
|
Stabilizing system |
Polyvinyl alcohol |
||
|
Additive agent |
Mineral Anti-block agent |
||
|
Product Technical Data |
|||
|
Item |
Unit |
Value |
Tolerance |
|
Solids content |
% |
98.0 |
±1 |
|
Ash content |
% |
12 |
±2 |
|
Bulk density |
g/L |
550 |
±50 |
| Fineness |
μm |
≤10.0 |
— |
|
PH value |
— |
6.0-8.0 |
— |
| Minim film forming temperature |
℃ |
0 |
— |
|
Glass transition temperature |
℃ |
+8 |
— |
Characteristics
ZJ-6015 series contains fine mineral anti-caking agents, does not contain any solvent, plasticizer and film-forming additive. It can improve the adhesion, flexural strength, plasticity, abrasion resistance and workability of the modified mixture, and has no adverse effect on the fluidity, thixotropy and water retention of the material.
Application areas
Typical applications for ZJ-6015 series is not only for blending with inorganic binders, such as cement, anhydrite, gypsum plaster and hydrated lime for the manufacture of structural adhesives, self-leveling mortars, wall troweling compounds, tile adhesive, plasters and repair mortars, but also as the exclusive binder for synthetic-resin-bound systems.
|
Application |
Suitability |
|
Flexible thin-bed mortars |
Recommended |
|
Tile adhesive |
Recommended |
|
Skim Coating |
High Recommended |
|
Ordinary putty |
High Recommended |
|
Concrete repairing mortars |
Suitable |
|
Gypsum applications |
High Recommended |
Package and Storage
Packed with kraft paper and plastic film lined film bag, 25kg/bag.
It should be stored in a cool place and keep away from moisture. Because it is thermoplastic, it should be stored under high temperature conditions, otherwise there will be a risk of agglomeration. From the time of delivery, the storage time should not exceed 6 months.
